Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear view mirror on the Dodge Ram 1500?

Model: RAM 1500 MK 4, DJ, DS - Years 2009-2019
Part: Side mirror

In order to replace the Dodge Ram 1500 external rearview mirror, you must first remove the triangular plastic cover that is located in correspondence with the mirror. Once removed, you will need to unscrew the screws securing the door panel, which are located near the inside handle and on the side of the panel. By removing the latter, it will be possible to disconnect the cable connected to the mirror and then unscrew the screws that secure it: by loosening the latter, it will be possible to remove the mirror from the outside and replace it with a new spare part.

Posted on 17 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Diagram of the fuse box of the 2003 Dodge Ram 1500.
Diagram of the fuse box of the 2003 Dodge Ram 1500.
RAM 1500 (2002-2009 / DH, MK 3, DR, D1, DM, DC) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the fuse box locations, the video also shows a diagram of …
Replace the starter motor on the Dodge RAM 1500
Replace the starter motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / MK 2, BR, BE) Let's replace the starter motor of the Dodge RAM 1500 together, following the instructions below. First of all we open the bonnet and we go to discon…
How to replace the indicator light bulb of the RAM 1500 wing mirror
How to replace the indicator light bulb of the RAM 1500 wing mirror
RAM 1500 (2009-2019 / MK 4, DJ, DS) In this short and simple guide we will see the instructions that will allow us to disassemble and replace the indicator light bulb of the RAM 1500 ex…

Other guides you may be interested in

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos