Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. Cv
  6. : How to change battery on ram hp

RAM Cv - Video tutorial

Model: RAM Cv MK 1 - Years 2012-2014
Part: Battery
Operation: How to change battery on ram hp

In the event that we have to replace the battery on this car model because it is no longer efficient, we can find advice and indications on how to proceed in the description below and in the video. Once the bonnet has been opened, identify the battery located on the left side of the compartment, then proceed to disconnect the negative pole first and then the positive one. Then unscrew the upper plate fixing nuts. In this way it will be possible to extract the battery from the compartment and proceed to replace it with a similar model. Then proceed to reconnect the positive pole first and then the negative and finally screw the upper plate fastening nuts back on.


Posted on 19 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos