Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 2500
    4. : Replace the front brake pads of the Ram 2500 MK4

RAM 2500 - Video tutorial

Model: RAM 2500 MK 4, D2, DJ, DS - Years 2009-2019
Part: Brake pads
Operation: Replace the front brake pads of the Ram 2500 MK4

Let's see in this video how to remove and replace the front brake pads of the Ram 2500 fourth series, in simple steps. First we lift the car with the jack and remove the front wheel; then we go to unscrew the fixing bolts of the front brake caliper, which we find on the back of the caliper, as in the video. At this point we remove the old pads located inside, replacing them with new ones (of the right type and of excellent quality); let's clean up the dirt from the caliper and reassemble everything, replacing the other front pads!


Posted on 2 July 2022 by ScegliAuto

This video is currently unavailable


Replacement of the front brake pads of the Dodge RAM 2500 MK4
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) Let's see in this short guide how to remove and replace the front brake pads of the Dodge RAM 2500, fourth series, in simple and quick steps. First o
How to replace the brake pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) We see in this guide the procedure necessary for the disassembly and replacement of the front and rear brake pads of the Dodge RAM 2500. First we lif
How to change the brake discs and pads of the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) In today's video we will see the main steps that will allow us to remove and replace the front brake pads and discs of the Dodge RAM 2500. First of a

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos