Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the V-belt on a Ram 2500?

Model: RAM 2500 MK 4, DS, DJ, D2 - Years 2009-2019
Part: V-belt

In order to replace the V-belt of the Ram 2500 you have to go and open the bonnet, so that you have access to the components inside the engine compartment: here you will have to unscrew the screws that fix the air filter box, so that this is completely removed giving access to the underlying components. Then you can loosen the nuts that fix the central pins of the pulleys, reducing the tension of the belt and replacing it with a new spare part. After the replacement it will be possible to install all the removed parts again.

Posted on 6 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the RAM 2500 located?
Where is the fuse box of the RAM 2500 located?
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) If you own a fourth series RAM 2500 and want to find out where all the various fuses are located, then all you have to do is read the following guide…
How do you replace the battery of the RAM 2500?
How do you replace the battery of the RAM 2500?
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) In order to replace the battery of the RAM 2500 you have to open the hood so that you can access the components inside the engine compartment. Once t…
How to replace the battery of the RAM 2500 remote control
How to replace the battery of the RAM 2500 remote control
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) If the remote control of your RAM 2500 (year 2013-2018) has suddenly stopped working and you want to find out how to correctly replace the battery, t…

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos