Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 1500
    4. : How do you replace the V-belt on the RAM 1500?

RAM 1500 - Video tutorial

Model: RAM 1500 DS, DJ, MK 4 - Years 2009-2019
Part: V-belt
Operation: How do you replace the V-belt on the RAM 1500?

In order to replace the V-belt of the Dodge RAM 1500 you have to go to open the hood so that you can have access to the components in the lower left part of the engine block. Here it will be possible to find the V-belt arranged around the relative pulleys: the belt can be removed by loosening the central pin of the pulleys, with consequent reduction of the belt tension. Once this has been removed, it will then be possible to insert the new one around the pulleys, so that these can then be re-fixed with the nuts of their central pins.


Posted on 6 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos