Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the RAM 1500 MK4

Model: RAM 1500 DS, DJ, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: V-belt

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the serpentine or V-belt on the RAM 1500 by following these simple steps. First, open the hood and start loosening the belt tensioner to disconnect it from the idler pulley and the crankshaft pulley; then replace it with the new, correct type.

At this point, re-tension the tensioner and properly install the new belt, manually rotating the pulleys to verify correct installation, following the tutorial video to the end!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacing the Serpentine Belt on the Dodge RAM 1500
Replacing the Serpentine Belt on the Dodge RAM 1500
RAM 1500 (1994-2001 / MK 2, BR, BE) Today, you will learn how to remove and replace the serpentine belt or alternator belt on the Dodge RAM 1500 in this video tutorial. First, open the …
How to Remove the Alternator from the RAM 1500 V8
How to Remove the Alternator from the RAM 1500 V8
RAM 1500 (2009-2019 / DS, DJ, MK 4) In this video tutorial, you will learn how to disassemble and replace the alternator on the RAM 1500 V8 by following the instructions below. First, o…
How to Replace the Serpentine Belt on a RAM 1500 Pickup?
How to Replace the Serpentine Belt on a RAM 1500 Pickup?
RAM 1500 (2009-2019 / DS, DJ, MK 4) In this tutorial, see how to replace the serpentine belt on a RAM 1500 pickup, a very simple operation. To comfortably access the belt, lift the fron…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos