Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the RAM 3500

Model: RAM 3500 DT, MK 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

Today, you will learn how to replace the cabin filter in the RAM 3500. The filter is easily available online or from a trusted dealer. To replace it, open the glove compartment and detach the retaining clip.

By bending the sides slightly, lower it until you can remove it from its housing. Inside, you will find the filter cover secured by two clips; remove them and take out the filter with its cover.

Compare the old and new filters to ensure they are identical, then install the new one in place. A new cover is usually included with the filter; install it with the arrow printed on it pointing in the direction of airflow.

Reassemble the glove compartment and its retaining cable, and you have completed the operation.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a RAM 3500 6.7L
How to Replace the Air Filter on a RAM 3500 6.7L
RAM 3500 (2009-2019 / DS, MK 4, DJ) In this video tutorial, you will learn how to remove and replace the air filter on a RAM 3500 6.7 liter, following the instructions below. First, ope…
How to Replace the Air Filter on a Dodge Ram 3500?
How to Replace the Air Filter on a Dodge Ram 3500?
RAM 3500 (2009-2019 / DS, MK 4, DJ) To replace the air filter on a Dodge Ram 3500, open the hood to access the engine compartment, as the air filter box is located inside. Specifically,…
How to Replace the Air Filter in a Dodge Ram 3500?
How to Replace the Air Filter in a Dodge Ram 3500?
RAM 3500 (2009-2019 / DS, MK 4, DJ) To replace the air filter in a Dodge Ram 3500, open the hood and locate the air filter box on the left side of the engine compartment. By loosening t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos