Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 3500
    4. : How to replace the fuel filter on the Dodge RAM 3500 6.7L Mk5

RAM 3500 - Video tutorial

Model: RAM 3500 MK 5, DT - Years 2019-2024
Part: Diesel filter
Operation: How to replace the fuel filter on the Dodge RAM 3500 6.7L Mk5

The guide shows you how to replace the Dodge RAM 3500 6.7L Mk5 fuel filter. The first step is to lift the vehicle and identify the position of the fuel filter; using a container with a rubber tube, drain the filter from the hole provided. After all the fuel has been drained, using a 28 mm wrench, unscrew the filter housing. Pay attention to the possible presence of fuel in the filter. Remove the cartridge and replace it with a new one. Close the housing and clean any fuel residues. From inside the engine compartment, having identified the second fuel filter, replace it and replace the gasket. Run the engine a few times to properly fill the filter housings and perform the fuel filter life indicator reset procedure.


Posted on 14 July 2022 by ScegliAuto



Replacement of the fuel filter for the Dodge RAM 3500 6.7L.
RAM 3500 (2019-2024 / MK 5, DT) Today we will discover the main steps that will allow us to disassemble and replace the fuel filter of the Dodge RAM 3500 6.7L. First, we lift the ve
How do I replace the fuel filter on the Dodge RAM 3500?
RAM 3500 (2019-2024 / MK 5, DT) There are two fuel filters in the Dodge RAM 3500, so replacement will need to be done twice. The first filter will be located inside the engine compa
How do you replace the air filter on a Dodge Ram 3500?
RAM 3500 (2009-2019 / DS, DJ, MK 4) In order to replace the air filter on the Dodge Ram 3500, you have to open the hood to access the engine compartment, as the air filter box is locate

How to open the seat of a scooter without the key

If we have to open the saddle on a scooter when we do not have the key, we can find the necessary information and useful information on how to move in the description below and also in the video. The saddle is normally opened by inserting the key in the dashboard and pressing the appropriate control. If we do not have the key available, we can still open it by removing the panel which is placed immediately under the saddle where we rest our feet and intercept the opening cable and then pull it manually. This way the saddle will open.

Watch the video!


by ScegliAuto

More videos