Do it yourself
| ||||
|
RAM 3500 - Video tutorial
Model: RAM 3500
DT, MK 5
- Years 2019-2024 Place the car on the bridge, the filter is located approximately in the center of the floor above the transmission. Using a socket wrench, unscrew the nut on the side of the filter to empty the fuel and wait a few seconds for it to empty completely. With a socket wrench, unscrew the cap located under the filter and remove it. There is an o-ring on the cap that must be replaced, remove the old filter and replace it with the new one and insert it into the cap exerting a certain pressure. Insert the filter and the cap into the housing. Screw the cap first by hand and then with the socket wrench.
Posted on 15 October 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |