Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Rotor on a Dodge Ram 3500

Model: RAM 3500 DS, MK 4, DJ - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake rotors

See other generations:
This video is currently unavailable

The video shows how to replace the brake rotor on a Dodge Ram 3500. This task is not very difficult and requires some skill and a few minutes of time. First, lift the vehicle with a jack at the wheel corresponding to the brake you want to work on. Remove the bolts to take off the wheel.

After loosening the bolts, use a hammer to help remove the hub assembly. At this point, remove the brake caliper.

After lubricating the nuts, unscrew them to remove the brake rotor. Replace the rotor and then reverse the entire procedure for reassembly.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Rotor on a RAM 3500
RAM 3500 (2009-2019 / DS, MK 4, DJ) To replace the rear brake rotor on a Dodge RAM 3500, loosen the bolts securing the wheel corresponding to the brake you are replacing. Once the wheel…
How to Replace the Front Brake Rotor on a RAM 3500?
RAM 3500 (2009-2019 / DS, MK 4, DJ) To replace the front brake rotor on a RAM 3500, lift the vehicle so that the wheel corresponding to the rotor being replaced is not in contact with t…
Removing the Hub Assembly from a Dodge Ram 3500
Removing the Hub Assembly from a Dodge Ram 3500
RAM 3500 (2009-2019 / DS, MK 4, DJ) The video shows a simple trick for removing the hub assembly from a Dodge Ram 3500. First, lift the vehicle to remove the wheel and the hubcap. Remov…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos