Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the wiper motor on the RAM 1500?

Model: RAM 1500 DR, DH, D1, DC, DM, MK 3 - Years 2002-2009
Part: Windshield wipers

The replacement of the wiper motor on the RAM 1500 is carried out by opening the hood, so that the two side screws that fix the grille at the base of the windscreen can be loosened; therefore, by removing the fixing rivets as well, it is possible to detach the grille and access the motor below. The latter must be released from its seat by unscrewing the fixing screws and those that connect it to the brushes. Then it will be necessary to disconnect the power connectors and connect them to the new motor, which will have to be fixed with the screws again. After installation, the grille and brushes will have to be reinserted.

Posted on 28 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the wiper blades on the RAM 1500?
How do you replace the wiper blades on the RAM 1500?
RAM 1500 (2019-2026 / MK 5, DT) In order to replace the RAM 1500 wiper blades, the arm must be raised so that the blade is not in direct contact with the windshield. At this point, …
How do you replace the crankshaft speed sensor of the RAM 1500?
How do you replace the crankshaft speed sensor of the RAM 1500?
RAM 1500 (2002-2009 / DR, DH, D1, DC, DM, MK 3) In order to replace the crankshaft revolution sensor of the RAM 1500, you need to go and lift the car, so that you can access the components in the l…
How do you replace the rear view mirror on the Dodge Ram 1500?
How do you replace the rear view mirror on the Dodge Ram 1500?
RAM 1500 (2009-2019 / DS, DJ, MK 4) In order to replace the Dodge Ram 1500 external rearview mirror, you must first remove the triangular plastic cover that is located in correspondence…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos