Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seat on Ram 1500?

Model: RAM 1500 DS, DJ, MK 4 - Years 2009-2019
Part: Seat

If it is necessary to remove the rear seat from the car, proceed as follows: open the rear hatch and overturn the seat cushion (side 2/3), there are screws under the cushion (front side and rear) which must be unscrewed with a socket wrench. At this point it will be possible to lift and extract the whole seat from the car. Since there is a seat holding hook at the rear of the seat, the whole seat must be lifted to release it. Finally, it is necessary to remove the seat belt located on the central seat.

Posted on 20 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seat of the RAM 1500
How to remove the rear seat of the RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) Today we will explain how to remove the rear seat on a RAM 1500 vehicle. We open the door on the passenger side rear and lift the seat in order to ac…
Where is the fuse box of the RAM 1500 located?
Where is the fuse box of the RAM 1500 located?
RAM 1500 (1994-2001 / BE, BR, MK 2) Thanks to the following procedure, you will be able to find the box containing all the fuses of your RAM 1500 in a few seconds and, above all, in tot…
How to change the light bulb on Dodge RAM 1500
How to change the light bulb on Dodge RAM 1500
RAM 1500 (2009-2019 / DS, DJ, MK 4) Let's see how to replace the bulbs on Dodge RAM 1500. Remember that the entire headlight must be removed, so open the tailgate of the trunk and unscr…

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos