Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery on the Ram Promaster

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Battery

On this vehicle model the battery is located under the floor on the driver's side in the space between the pedal box and the seat. To access it, therefore, it is necessary to remove the panel located on the top and then proceed to disconnect first the negative pole clamp and then the positive one. Remove the battery from the compartment and replace it with the new one having first checked that the power is the same and therefore the battery is compatible with the car model and proceed to reconnect first the positive pole and then the negative one and finally reposition the cover panel .

Posted on 26 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Dodge Ram Promaster key remote control battery
How to replace the Dodge Ram Promaster key remote control battery
RAM Promaster (2014-2022 / MK 1) We see below the instructions necessary to remove and replace the remote control battery of the Dodge Ram Promaster key. First of all we take our rem…
How to replace the battery in the RAM ProMaster key.
How to replace the battery in the RAM ProMaster key.
RAM Promaster (2023-2026 / MK 2) The procedure needed to replace the button battery located inside the smart key of your RAM ProMaster is very similar to what has already been seen i…
How to replace the key battery on RAM Promaster
How to replace the key battery on RAM Promaster
RAM Promaster (2014-2022 / MK 1) In this video we can see how to replace the remote control battery on RAM Promaster. The material needed to replace the battery: A battery mod. CR 20…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos