Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio in a RAM 1500 Pickup?

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Car stereo

As we can see in this tutorial, removing the radio in a RAM 1500 pickup is an extremely simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Start by grasping the trim of the center console, then pull it firmly towards you to disengage it. Once done, optionally disconnect the connectors at the back and remove the 4 mounting screws for the radio located at the corners. At this point, you can pull the unit from the housing, disconnect the connectors, and install the replacement if needed.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the horn fuse located in the RAM 1500 pickup?
Where is the horn fuse located in the RAM 1500 pickup?
RAM 1500 (2019-2026 / DT, MK 5) If the horn in your RAM 1500 pickup suddenly stops working, the first thing to do is check the status of the corresponding fuse. As shown in this vid…
Where Are the Airbag Fuses Located in the RAM 1500 Pickup?
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this video, you can see where the airbag fuses are located in the RAM 1500 pickup, which are the first elements to check in case of a malfunction …
How to Replace the Remote Battery in a RAM 1500 Pickup?
How to Replace the Remote Battery in a RAM 1500 Pickup?
RAM 1500 (2019-2026 / DT, MK 5) As seen in this tutorial, replacing the remote battery in a RAM 1500 pickup is a very simple and quick operation. For this, you will need a small fla…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos