Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the 2017 Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Service warning light

The reset of the service light on the 2017 Renault Megane must be performed after servicing operations. To reset the service light, we will need to: - turn on the instrument panel; - press the arrow button on the steering wheel to access the menu; - scroll through the menu until selecting the option for service reset; - hold down the OK button until the reset is complete; We conclude the service light reset by returning to the main menu and turning off the vehicle, then restarting it after a few seconds. If the reset is not successful, we can repeat the operation.

Posted on 23 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) We can see thanks to this very short tutorial today the whole process, step by step, to reset the maintenance light on a third generation Renault Meg…
Renault Megane (2008-2015 / Megane III, Megane 3) Today we will explain how to reset the service light on a Renault Megane model 3. Turn on the instrument panel and press the upper arrow button repea…
Renault Megane (2002-2010 / Megane 2) To reset the Service light of the Renault Megane, you need to turn on the instrument panel by inserting the appropriate key into the corresponding ig…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos