|
Do it yourself
| |||
| ||||
How to check and repair the Renault injection system
Model: Renault Renault Various
In this video we see that on a Renault car the wrench light appears and at the same time the car enters emergency mode, so it does not go over 90 km/h. We will need to connect to the car's EOBD socket, and here an error was found on the differential pressure through the particulate filter. This engine has a fault on the pipes from the DPF to the differential pressure sensors, so they will be checked; they are located on the left side of the engine, near the red arrow. To check them, they were disassembled. First we remove the air pipe, pressing the clips and pulling it. We will then remove the air pipe indicated by the red arrow. Loosen the two electrical clamps, remove the three screws from the engine support. Once the pipes were removed, we found the problem. The red pipe had become thin and weak, and once the pipes were removed they split in two, so they were replaced with original Renault pipes, and now the car runs perfectly.
Posted on 31 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Renault Various
In this video, we will see what it means when a generic engine light comes on, indicating that there is an issue with the engine management system. M…
Renault Renault Various
In this video tutorial, you will learn how to unlock the car radio in Renault models by entering the specific code. Get inside the vehicle: if you wa…
Renault Renault Various
In this video we see a propaganda film by Renault about the K9K 1.5 DCi engine with 115 hp. This is an extremely common engine, which is mounted not …
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.238
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
