Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

Today, you will see how to perform a service reset on a second-generation Renault Megane. Start by turning on the instrument cluster without starting the engine.

Next, press the down arrow button located at the end of the right stalk until you reach the oil change option on the vehicle's information display. Once there, press and hold the up arrow button, also located at the end of the right stalk, and keep it pressed until the service interval reset is complete.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Service Reset on a Renault Megane 3
Service Reset on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) .. shown the step-by-step procedure to perform the service reset on a Renault Megane 3, model produced from 2008 to 2015. First, turn on the ignition of.. …
Service Reset on Renault Megane 2017
Service Reset on Renault Megane 2017
Renault Megane (2015-2023 / Megane IV, Megane 4) Thanks to this brief yet useful video tutorial, we can see the entire procedure necessary to reset the service light on a fourth-generation Renault M…
How to Reset the Service Light on a Renault Megane 3
How to Reset the Service Light on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) In this very short tutorial, we will see how to reset the service light on a Renault Megane 3, model produced from 2008 to 2015. Start the procedure …

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos