Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Service warning light

In this very short tutorial, we will see how to reset the service light on a Renault Megane 3, model produced from 2008 to 2015. Start the procedure by turning on the instrument cluster of your vehicle without starting the engine. Next, press the top button on the right stalk until the service required notification appears on the display. Then, press and hold the bottom button on the right stalk until the service reset is complete, as shown in the video. Finally, restart the vehicle.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Megane?
How to Reset the Service Light on a Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) To reset the Service light on a Renault Megane, insert the ignition key to turn on the instrument cluster, noting that the Service light will appear.…
How to Reset the Service Light on a Renault Megane?
How to Reset the Service Light on a Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) The method to reset the service light on a Renault Megane, specifically the Renault Megane 3, is explained here: Switch on the instrument cluster. Us…
How to reset the Service light on the Renault Megane?
How to reset the Service light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To reset the Service light on the Renault Megane, turn on the ignition by inserting the key and pressing the appropriate button. Once the instrument …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos