Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Renault Kangoo

Model: Renault Kangoo MK 3, KFK, FFK - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

In today's article, we will see how to reset the tyre pressure warning light on a Renault Kangoo, in case the light stays on even after bringing the tyres back to the correct pressure. To reset the light, first, start the ignition, then press the menu button located on the right side of the steering wheel to access the vehicle menu.

Once you find this menu, press the up or down arrow button to navigate until you locate the tyre pressure option. Once you find this light, press the OK button and hold it down to confirm the reset.

When the reset begins, release the button and wait for the procedure to complete before restarting the ignition.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…
How to Reset the Maintenance Light on the Renault Kangoo 3?
How to Reset the Maintenance Light on the Renault Kangoo 3?
Renault Kangoo (2020-2026 / MK 3, KFK, FFK) Resetting the maintenance light on the Renault Kangoo third series is very simple, as shown in the video that demonstrates the entire procedure in un…
How to reset the oil warning light on the Renault Kangoo 2024
How to reset the oil warning light on the Renault Kangoo 2024
Renault Kangoo (2020-2026 / MK 3, KFK, FFK) To complete the manual reset procedure for the engine oil warning light on your Renault Kangoo (year 2024), simply follow these steps. First, you nee…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos