Do it yourself
Frequently asked questions about cars and motorcycles

Reset the Service Reset on Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Warning light – error code

Follow these steps to reset the maintenance service on a Renault Twingo. This is a very simple operation: enter the vehicle, turn on the instrument panel and check the warning light, press the button on the right lever near the steering wheel, scroll through the menu on the display using the up and down buttons, confirm with the side button as shown in the video. Turn off the instrument panel after the service reset, then check the display for confirmation of completed maintenance. Always remember to make service adjustments with the vehicle stationary and turned off.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2007-2014 / Twingo 2) Today, we will discover the instructions to reset the service light for the routine maintenance of the engine oil change on the Renault Twingo. First…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Today, you will update the mileage for the next service on a 2014 Renault Twingo mk3. The service light reset should only be performed after changing…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, you will see how to reset the service on the Renault Twingo, a very simple and quick operation. Before doing this, ensure that you …

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 2014-2024 - What to do if the "STOP" warning light comes on in the Renault Twingo? Read answer
    • Twingo 2014-2024 - What does the "STOP" warning light mean in the Renault Twingo? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos