Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the spark plugs of the Renault Clio III.

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs of the Renault Clio, we open the hood of the engine compartment, remove the engine cover. Disconnect the connector of the first coil, with a 10mm socket wrench unscrew the bolt that secures the coil and remove it gently, take a spark plug socket with an extension and unscrew the old spark plug, take the new one and insert it into the socket and screw it by hand until it is tight, finish tightening with the wrench for a sixteenth of a turn.

Remove the socket and insert the coil pushing it until you hear a click, secure it with the bolt and insert the connector. Repeat the same operations with the other three spark plugs.


Posted on 24 February 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Renault Clio
How to Replace the Spark Plugs on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Before starting, open the front bonnet of your Renault Clio. Begin by dismantling and removing the air filter housing by unscrewing the fixing screws…
How to Replace the Spark Plugs on the Renault Clio
How to Replace the Spark Plugs on the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the spark plugs on the Renault Clio, open the bonnet to detach the plastic cover from the top of the engine block. This will allow you to …
Replacing the Starter Motor on a Renault Clio 3
Replacing the Starter Motor on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, you will learn how to remove and replace the starter motor on a Renault Clio third series. First, open the bonnet of the car and remove the ba…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos