Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on a Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

Today, you will learn how to remove and replace the starter motor on a Renault Clio third series. First, open the bonnet of the car and remove the battery by taking off the plastic cover and disconnecting the terminals (positive and negative); then remove the air filter box and the intake hose, disconnecting the intake manifold pipes.

At this point, remove the oil dipstick and take out the glow plug connectors and the pressure sensor; unscrew the fixing bolts of the starter motor and the electrical connector to replace it.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor on the Renault Clio 2 1.2 8V
Replacing the Starter Motor on the Renault Clio 2 1.2 8V
Renault Clio (1998-2005 / MK 2, Clio 2) In today's video, we will see the main instructions that will allow us to dismantle and replace the starter motor on the Renault Clio 1.2 8V petrol. …
How to replace the starter motor on a Renault Clio 1.5 dCi
How to replace the starter motor on a Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the starter motor on a Renault Clio 1.5 dCi. First, open the bonnet and disconnect …
How to Replace the Starter Motor on the Renault Clio 1.5 dCi
How to Replace the Starter Motor on the Renault Clio 1.5 dCi
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, we will discover the instructions to remove and replace the starter motor on the Renault Clio 1.5 dCi. First, open the bonnet of the vehicle a…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos