|
Do it yourself
| |||
| ||||
How to replace the spark plugs of a Renault Clio IV
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
In this video, we will see how to replace the spark plugs on a Renault Clio IV. We open the hood of our car and remove the cover from the engine block: now we are able to see the position of the coils, under which are the spark plugs. We disconnect the electrical connectors from the coils, and using a socket wrench, we remove the screw that secures the coil. If we remove all the coils together, it is convenient to number them, to make sure we put them back in their place. We need to be careful, as the coils are a fragile component. Then, with a hex key with an extension, we remove the spark plug from its housing. We must be very careful not to drop the spark plug into the tube. We insert the new spark plug directly into the socket, screw it in, and then put the coil back in place. We screw in the bolt and reconnect the electrical connector. We repeat this operation for the other two, and we have finished our work.
Posted on 20 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(1998-2005 /
Clio 2, MK 2)
To replace the spark plugs on the Renault Clio, open the bonnet to detach the plastic cover from the top of the engine block. This will allow you to …
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
Before starting, open the front bonnet of your Renault Clio. Begin by dismantling and removing the air filter housing by unscrewing the fixing screws…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
In today's video tutorial, we will see how to remove and replace the spark plugs on a Renault Clio 1.4 16 valves, following the instructions below. F…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.660
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |