Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Spark Plugs on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Spark plugs

How do you remove and replace the spark plugs on a Renault Clio? Here’s how to proceed: open the engine bay and lift the bonnet, secure it, disconnect the battery terminals. Remove the soundproofing panel covering the engine and using a screwdriver or pliers, remove the coils from the cylinder head; then unscrew the spark plugs with a socket spanner, pulling them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket spanner into the cylinder head; tighten them and reconnect the ignition coils to each spark plug with the new leads.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Renault Clio
How to Replace the Spark Plugs on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before starting, open the front bonnet of your Renault Clio. Begin by dismantling and removing the air filter housing by unscrewing the fixing screws…
How to Replace the Spark Plugs on the Renault Clio
How to Replace the Spark Plugs on the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the spark plugs on the Renault Clio, open the bonnet to detach the plastic cover from the top of the engine block. This will allow you to …
How to Change the Spark Plugs on a Renault Clio 1.4 16V
How to Change the Spark Plugs on a Renault Clio 1.4 16V
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) .. In today's video tutorial, we will see how to remove and replace the spark plugs on a Renault Clio 1.4 16 valves, following the instructions.. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos