Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob on a Renault Sandero and Logan

Model: Renault Renault Various
Part: Shift knob

Video tutorial

Replacing the gear knob of a Renault Sandero and a Renault Logan follows the same procedure. To perform the replacement, we need to lift the gear lever gaiter with the help of a flathead screwdriver and then remove the clamp located at the base of the knob.

Once the clamp is removed with pliers, we remove the knob by pulling upwards and insert a new knob in its place, securing it at the base with a clamp. We position the gaiter and test the operation of the gear lever.

This procedure does not require too many minutes of your time, in fact it can be done in ten minutes.


Posted on 3 March 2025 by ScegliAuto


Related tutorials

How to change the gear knob on a Renault Logan
How to change the gear knob on a Renault Logan
Renault Renault Various To change the gear knob on a Renault Logan, first detach the gaiter from the base of the centre console. Insert your fingers between the gaiter frame…
Where are the Fuses in a Renault Logan?
Where are the Fuses in a Renault Logan?
Renault Renault Various The Renault Logan has two fuse boxes. This situation is similar to many other cars on the market, as the two fuse boxes are located in the same way: …
How to replace the Renault remote control battery
How to replace the Renault remote control battery
Renault Renault Various Today we will explain how to replace the battery of the remote control for Renault vehicles Clio 4, Koleos, Scenic 3, Captur, and Megane 3. To replac…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos