How to reset the service light on the Renault Captur using a scanner

Resetting the "Service" light on a Renault Captur using an OBD2 scanner is a fairly simple operation. Here are the steps you should follow: ### Tools needed: - **Compatible OBD2 scanner**: Make sure you have a scanner that supports the Renault Captur and has the function to reset the service light. ### Procedure: 1. **Connect the OBD2 scanner**: - Find the OBD2 port in your Renault Captur. It is usually located under the dashboard, near the steering wheel. - Connect the OBD2 scanner to the OBD2 port. 2. **Turn on the instrument cluster**: - Turn the ignition key to the "ON" position (without starting the engine) or press the ignition button to turn on the instrument cluster. This will power the scanner. 3. **Start the scanner**: - Turn on the OBD2 scanner. Follow the on-screen instructions to access the main menu. 4. **Select the vehicle**: - Many scanners require you to select the model and year of the vehicle to communicate properly with the vehicle's system. Select "Renault" and then "Captur" (or manually enter the required information). 5. **Access the maintenance menu**: - Once the scanner has established communication with the vehicle, go to the menu that manages maintenance or service. This is usually under an option called "Reset Oil Service", "Service Reset", "Maintenance", or similar. 6. **Reset the Service light**: - Follow the on-screen instructions on the scanner to reset the Service light. This process may include confirming the mileage for the next maintenance interval. 7. **Confirmation and verification**: - After resetting the light, turn off the instrument cluster and disconnect the OBD2 scanner. - Turn the car back on to verify that the service light has been reset correctly.