Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door seal on the Renault Megane 2?

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Car door

It is correct to underline that the present video was not shot on a Renault Megane 2, but since it is a job that involves standardized steps, it can be considered relevant for it as well and therefore to be followed for the completion of the intervention mentioned above. The protagonist simply grabs the aforementioned gasket and pulls it, causing it to come out of its guide and detach from its plastic stops. The installation of the new one does not involve any difficulty, in fact it is a procedure just as simple and fast. In this way, for example, the problem of rustling when the car is in motion can be solved.

Posted on 2 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Handle of the Renault Megane?
How to Remove the External Handle of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the external handle of the Renault Megane, open the door and detach the seal covering the entire perimeter of the door at the handle height…
How to repair the trunk spring of a Renault Megane IV
How to repair the trunk spring of a Renault Megane IV
Renault Megane (2015-2023 / Megane 4, Megane IV) In this video we see how to easily repair the trunk spring of the Renault Megane IV: as we can see, the spring has loosened and the tailgate no longe…
How to Remove the Door Panel of a Renault Megane?
How to Remove the Door Panel of a Renault Megane?
Renault Megane (1995-2003 / Megane 1) Start by opening the front door of your Renault Megane. Once done, remove the internal door handle by unscrewing the fixing screw and disconnecting t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos