Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights in the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Tail light

In this tutorial we can see how to disassemble the rear lights in the Renault Kadjar, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door, locate the bolts along the inner edge of the headlight in question and unscrew them using a Torx T20 key. Then grab the headlight, pull it towards you and separate it from the bodywork. At this point, we can disconnect the power connector, replace the damaged element and reassemble everything following the reverse procedure.

Posted on 2 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights in the Renault Kadjar?
How to replace the rear lights in the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) In this tutorial, we can see how to replace the rear lights in the Renault Kadjar, an extremely simple and fast operation. First of all, make sure th…
How to Remove the Rear Bumper from a 2019 Renault Kadjar
How to Remove the Rear Bumper from a 2019 Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Let's see how to remove the rear bumper from a Renault Kadjar. Open the tailgate and start by removing all the screws between the bumper and the boot…
How to Remove the Gear Knob on a Renault Kadjar
How to Remove the Gear Knob on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you begin, sit in the driver's seat of your Renault Kadjar. Start by prising off and removing the upper section of the gear knob, then repeat …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos