Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear taillight of the Renault Trafic 2?

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

Reaching the disassembly of the rear light of the Renault Trafic 2, like any other vehicle on the market, is related to various needs. It may need to be replaced because it is broken, or a weld on the contact plate of the bulb holders needs to be restored, and so on. In the video guide above, we see how to proceed with a do-it-yourself approach: simply unscrew the locking pins on the left side of the light, and then pull it firmly towards the outside so that it detaches from the bodywork.

That's all, a job that can be defined as simple and short in duration, within everyone's reach.


Posted on 5 May 2025 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of the Renault Trafic?
How to Remove the Front Headlamp of the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To remove the headlamp from the Renault Trafic, open the bonnet to access the screws securing the headlight unit within its housing. These will be lo…
How to Replace the Rear Light on a Renault Trafic
How to Replace the Rear Light on a Renault Trafic
Renault Trafic (2014-2026 / MK 3) To replace the rear light on a Renault Trafic, open the rear door and loosen the fixing screws located next to the light. Once these screws are remov…
How do you remove the rear lights of the Renault Trafic 2?
How do you remove the rear lights of the Renault Trafic 2?
Renault Trafic (2001-2014 / MK 2) The work mentioned above can also be done by yourself, it is not considered complex and does not require, if we want, to turn to a workshop. Now let'…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos