Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Renault Triber?

Model: Renault Renault Various
Part: Service warning light

In order to reset the Service light that appears on the instrument panel of the Renault Triber, you need to insert the ignition key into the slot, turn it to start the instrument panel. Once the panel is on, you can press and hold the button on the right side of the instrument panel for a few seconds. This will cause the Service light to start flashing and the maintenance interval will be reset. By pressing the button again for a few seconds, you can increase the maintenance interval.

Posted on 5 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Triber
How to reset the service light on the Renault Triber
Renault Renault Various If you own a Renault Triber and want to learn how to correctly perform a manual reset of the service light, then all you have to do is read the follo…
How do you reset the Service indicator light on the Renault Triber?
How do you reset the Service indicator light on the Renault Triber?
Renault Renault Various In order to reset the Service light that appears on the instrument panel of the Renault Triber, you need to insert the ignition key into the correspo…
How to Reset the Service Light on the Renault Triber
How to Reset the Service Light on the Renault Triber
Renault Renault Various In this new mini guide dedicated to all of you who own a Renault Triber, we will discover the steps to properly complete the manual reset of the serv…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos