Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light on the Renault Trafic?

Model: Renault Trafic MK 3 - Years 2014-2026
Part: AdBlue warning light

It will be possible to reset the AdBlue warning light of the Renault Trafic by first performing a top-up with the necessary amount of additional fluid: to do this, you will need to open the fuel filler flap and remove the blue cap underneath. Once the top-up is done, you will need to connect a diagnostic tool to the OBD port of the vehicle: this can be found under the steering column. After the connection, you will need to select the model of the vehicle in question and clear the error: finally, you will be able to turn off the instrument panel.

Posted on 22 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue refill warning on the Renault Trafic
How to reset the AdBlue refill warning on the Renault Trafic
Renault Trafic (2014-2026 / MK 3) The following steps will allow us to reset the AdBlue fluid refill warning on the Renault Trafic; before resetting the warning light, it is necessary…
How to reset the AdBlue warning light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occu…
How to Reset the AdBlue Warning Light on the Renault Trafic
How to Reset the AdBlue Warning Light on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) To reset the AdBlue warning light on the Renault Trafic, first top up the tank by adding the necessary amount of additive liquid into the designated …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos