Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Service warning light

To reset the "Service" light on a Renault Captur, start by turning on the instrument panel without starting the engine. Use the buttons on the turn signal lever to navigate through the onboard computer menu. Press repeatedly until you see the section dedicated to maintenance or service intervals. When the maintenance interval indication appears, hold down the button for a few seconds until the value resets or a confirmation message appears. At this point, the "Service" light should turn off, indicating that the system has recorded the reset of the maintenance interval. To verify that the operation has been carried out correctly, you can turn off and on the instrument panel.

Posted on 2 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
How to reset the Service light on the Renault Captur?
How to reset the Service light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) You can clear the Service light from the instrument cluster of the Renault Captur by turning on the ignition after inserting the key into the ignitio…
How do you reset the Service light on the Renault Captur?
How do you reset the Service light on the Renault Captur?
Renault Captur (2019-2026 / MK 2) To reset the Service light of the Renault Captur, you need to insert the ignition key into the corresponding slot, turn it to turn on the instrument …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos