Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Brake Disc on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Brake rotors

Learn how to remove and replace the brake disc on a Renault Megane. First, lift the car on a column jack to the desired height, then remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Unscrew the locking bolt of the brake caliper and remove it from the caliper support. Use a socket spanner to detach the caliper support from the wheel hub. Once the brake disc is free, unscrew the screws with a fixed spanner and detach the brake disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace everything with new parts (always fit original and compliant parts).

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Disc on a Renault Megane
Replacing the Rear Brake Disc on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Is the rear brake disc on your Renault Megane due for replacement? Here’s how to remove the brake disc. Lift the car using a column lift, then remove…
How to Remove the Front Brake Disc from a Renault Megane
How to Remove the Front Brake Disc from a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Before you start, lift the front end of your Renault Megane. Begin by removing the front wheel by unscrewing the relevant fixing bolts. Next, unscrew…
How to Replace the Rear Brake Pads on a Renault Megane?
How to Replace the Rear Brake Pads on a Renault Megane?
Renault Megane (2002-2010 / Megane 2) To replace the rear brake pads on a Renault Megane, first unscrew the bolts that secure the wheel to the hub, allowing access to the disc and brake a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos