Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Replacing the rear disc on Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Brake discs
Operation: Replacing the rear disc on Renault Megane

Does the rear brake disc of a Renault Megane need to be replaced? Let's see how the brake disc is removed. We lift the car with a column bridge, immediately after we go to remove the rear rim (with a telescopic wrench) with the respective pins. We unscrew the pin of the brake caliper, remove the same from above the disc. We disassemble the brake disc (we unscrew the brake screws). We mount the new brake disc over the rear hub. We mount the brake caliper with the holder on the brake disc. We refill the caliper pump if we have had pressure losses. We test the brakes of the Renault Megane.


Posted on 8 December 2023 by ScegliAuto



How to remove the front brake disc of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Before starting, we will have to raise the front end of our Renault Megane. So let's start by disassembling the front wheel, unscrewing the relative
How to replace the rear brake pads on the Renault Megane?
Renault Megane (2002-2010 / Megane 2) In order to replace the rear brake pads of the Renault Megane you have to unscrew the bolts that secure the wheel to the relative hub, so that you ca
How to remove the rear disc brake on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's see how to remove and replace the disc brake on a Renault Megane. First of all we lift the car on a column point to the desired height, immedia

    Frequently Asked Questions

    • Megane 2008-2015 - How much does it cost to replace the brakes on the Renault Megane III? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos