Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the oil pump of the Renault Megane 1.4

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

See other generations:
Video tutorial

This guide will provide the main instructions on how to remove and replace the oil pump of the Renault Megane 1.4. To remove the oil pump, you will need to lift the vehicle and drain the engine oil. Next, undo the bolts securing the oil sump, remove it, and access the oil pump as shown in the video.

At this point, remove and inspect the oil pump, replacing it if necessary; clean the oil sump and then replace the gasket, following the video tutorial to the end!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Replacement of the fuel pump of the Renault Megane
Replacement of the fuel pump of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) This short and simple guide will show us how to disassemble and replace the fuel pump of the Renault Megane. First of all, we open the rear doors of …
Replacing the Fuel Pump on a Renault Megane
Replacing the Fuel Pump on a Renault Megane
Renault Megane (2002-2010 / Megane 2) This tutorial shows how to replace the fuel pump on a second series Renault Megane. The fuel pump is located under the rear seats of the vehicle. Onc…
Guide to Replacing the Clutch Pump of the Renault Megane
Guide to Replacing the Clutch Pump of the Renault Megane
Renault Megane (2002-2010 / Megane 2) In this guide, we will look at the main instructions for removing and replacing the clutch pump or master cylinder of the Renault Megane. First, open…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos