Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Windscreen Washer Pump on Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Pump

Today, learn how to remove the windscreen washer pump from a second series Renault Megane. To remove the washer pump, you need to take off the front bumper: first, remove the screws located above the engine bay on the plastic shield and the screws found underneath the bumper. Finally, remove the screws located in the wheel arches on both sides. At this point, unclip and remove the bumper (even if not completely) and then remove the washer pump by unscrewing the support screw and disconnecting the power electrical connector; replace it with the new one.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Washer Pump on a Renault Megane 2
How to Replace the Windscreen Washer Pump on a Renault Megane 2
Renault Megane (2002-2010 / Megane 2) If activating the windscreen wiper lever does not release fluid from the sprayers, it means the pump installed at the base of the washer fluid reserv…
Guide to Removing the Cylinder Head Cover on a Renault Megane 1.4 MK1
Guide to Removing the Cylinder Head Cover on a Renault Megane 1.4 MK1
Renault Megane (1995-2003 / Megane 1) In this guide, you will discover the main steps to disassemble and replace the cylinder head or valve cover on the first series Renault Megane with a…
Where are the Fuses Located on the Renault Megane?
Where are the Fuses Located on the Renault Megane?
Renault Megane (2002-2010 / Megane 2) Each fuse in the Renault Megane is located inside one of the dedicated fuse boxes present on the vehicle: in this type of vehicle, you will find two …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos