Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel flap actuator of the Renault Scenic?

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Checks and maintenance

To replace the fuel flap of the Renault Scenic, you need to loosen the screws that secure the corresponding panel located on the right side of the trunk: once this panel has been removed, you will be able to locate the underlying motor. This motor will need to be freed from the corresponding fixing screws and the related power cables: this will allow you to insert the new replacement part. You can then secure it and verify that everything is functioning correctly.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open a Stuck Fuel Flap on a Renault Scenic?
How to Open a Stuck Fuel Flap on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) On the Renault Scenic, it may happen that the fuel flap gets stuck, for example, due to an issue with the locking button or the lock actuator. In the…
How to reset the sunroof of the Renault Scenic II
How to reset the sunroof of the Renault Scenic II
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this video we see how to reset the button that controls the opening and closing of the sunroof of the Renault Scenic II: In fact, we have this whe…
Removing the Electric Lock on a Renault Scenic
Removing the Electric Lock on a Renault Scenic
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) To locate the automatic boot opening mechanism on a Renault Scenic, first remove the panel from the tailgate, which is secured with four screws at th…

    Frequently Asked Questions

    • Scenic 2009-2015 - What are the problems with the Renault Scenic? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos