Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Renault Modus?

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Clock

Video tutorial

To adjust the clock shown on the central display of the Renault Modus, you need to turn on the ignition by inserting the ignition key into the corresponding slot: once the ignition is activated, you can press and hold the button located at the bottom right of the dashboard.

This will make the hours start flashing and you can change them by repeatedly pressing the same button; after adjusting the hours, you can press the button again to adjust the minutes in the same way.


Posted on 12 November 2025 by ScegliAuto


Related tutorials

How to Enter the Unlock Code for the Radio on a Renault Modus
How to Enter the Unlock Code for the Radio on a Renault Modus
Renault Modus (2004-2013 / MK 1) Before you begin, sit in the driver's seat of your Renault Modus. Start by activating the instrument cluster and the onboard computer. Then, press an…
How to Replace the Front Headlamp Bulb on a Renault Modus
How to Replace the Front Headlamp Bulb on a Renault Modus
Renault Modus (2004-2013 / MK 1) Before starting, open the bonnet of your Renault Modus. Begin by removing the front bumper, unscrewing the screws and bolts. Next, remove the headlam…
How to Remove the Steering Wheel from a Renault Modus
How to Remove the Steering Wheel from a Renault Modus
Renault Modus (2004-2013 / MK 1) Sit in the driver's seat of your Renault Modus. Next, unscrew and remove the screws securing the airbag to the steering wheel. Once done, extract and…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos