Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Modus
    4. : How to remove the dashboard of a Renault Modus

Renault Modus - Video tutorial

Model: Renault Modus MK 1 - Years 2004-2013
Part: Dashboard
Operation: How to remove the dashboard of a Renault Modus

To disassemble the dashboard of a Renault Modus we will need a flat screwdriver / any other thin but resistant tool with which we will go to leverage. Let's start by aiming our slotted screwdriver at the bottom right of the dashboard, into the gap between the dashboard and its seat, applying light force and leveraging. Once we have managed to insert the screwdriver into the slot, we gently begin to slide it around the perimeter. By doing this we will have been able to unhook all the hooks that fixed the dashboard. However, before we can remove it completely, we will have to go and disconnect the pin of the control of the four arrows from the dashboard. Once this step is complete, we will have finished our teardown.


Posted on 16 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos