Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of the Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Blower motor

The instructions in this guide will show us how to disassemble and replace the cabin fan of the Renault Modus. First, we open the front passenger door and start disassembling and removing the glove compartment, opening it and unscrewing all the screws we find on the sides; then we unscrew the fan mounting screws, disconnecting the power connector to remove it, as shown in the video. At this point, we remove and replace the fan with the new one, installing it correctly, following the video tutorial until the end!

Posted on 31 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan of the Renault Modus
How to replace the cabin fan of the Renault Modus
Renault Modus (2004-2013 / MK 1) Today's instructions will allow us to disassemble and replace the cabin fan of the Renault Modus. First, we get on board the cabin and start disassem…
How to replace the cabin fan in the Renault Modus?
How to replace the cabin fan in the Renault Modus?
Renault Modus (2004-2013 / MK 1) In this tutorial, we can see how to replace the cabin fan in the Renault Modus, an extremely simple and quick operation. First of all, make sure that…
How to Remove the Glove Compartment and Cabin Fan on a Renault Modus
How to Remove the Glove Compartment and Cabin Fan on a Renault Modus
Renault Modus (2004-2013 / MK 1) Here are the steps to remove and replace the glove compartment and cabin fan on a Renault Modus. First, get inside the vehicle and open the glove com…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos