Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the radio of the Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Car stereo

In order to replace the car radio of the Renault Captur, you need to use a tool like a screwdriver to pry off the panel surrounding the device: once this panel has been removed, you can loosen the screws holding the radio in place in order to disconnect the connectors at the back. At this point, you can connect the new device to them so that it can be inserted into its slot: you can secure it with the appropriate screws and then reattach the central dashboard panel to ensure that everything works correctly.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the car radio of a Renault Captur?
How to remove the car radio of a Renault Captur?
Renault Captur (2013-2019 / MK 1) Good morning, today's guide aims to dismantle the car radio of our Renault Captur. Let's start by sitting in the driver's seat. Then, using a thin bu…
Removing the Original Radio from Renault Captur
Removing the Original Radio from Renault Captur
Renault Captur (2013-2019 / MK 1) This guide shows you how to remove the original radio from a first-generation Renault Captur by following these simple steps. First, get inside the v…
How to Remove and Replace the Standard Radio in a Renault Captur
How to Remove and Replace the Standard Radio in a Renault Captur
Renault Captur (2013-2019 / MK 1) This guide outlines the steps to remove and replace the standard radio in a Renault Captur, as well as in a Clio. First, get inside the vehicle and s…

    Frequently Asked Questions

    • Captur 2019-2026 - What to do when the touch screen on Renault Captur does not work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos