Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan resistor of the Renault Twingo?

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan resistor of the Renault Twingo, you will need to completely remove the dashboard: start by removing the central control panel, which should be levered out with an object and unscrewing the screws underneath. Then remove the glove compartment and proceed by detaching the side panels: the fan here should be freed from its support screws and the appropriate connectors.

In this way, you can also remove the corresponding resistor, insert the new one, and cover everything with the panel.


Posted on 18 August 2025 by ScegliAuto


Related tutorials

Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…
How to Remove the Cabin Fan Resistor of the Renault Twingo
How to Remove the Cabin Fan Resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The cabin fan resistor on a Renault Twingo is located inside the upper dashboard of the vehicle. To replace the resistor, remove the upper part of th…
How to Replace the Cabin Fan Resistor in the Renault Twingo
How to Replace the Cabin Fan Resistor in the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) You can replace the cabin fan resistor in the Renault Twingo by completely disconnecting the panel located at the top of the dashboard on the passeng…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos