|
Do it yourself
| |||
| ||||
How to change the transmission oil on a Renault Megane II 1.5 dCi
Model: Renault Megane
Megane 2
- Years:
2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Let's see how to change the gearbox oil on a Renault Megane II 1.5 dCi: it is advisable to use a transmission cleaner using a funnel and a tube: unscrew the filler cap (the white plastic cap on the left side of the gearbox), such as Motul-Transmission Clean that can be found on eBay with code 186826099450 at a price of 10.14 euros + 5.99 euros for shipping. Replace the cap and start the engine at idle for 15 minutes; this helps to loosen deposits. Then lift the car and support it on jack stands. Under the drain plug, place a container for collecting the old oil (which will then be disposed of correctly at an authorized center). Replace the plug and gasket and insert the funnel into the filler hole, slowly pouring in the new oil: the gearbox fills by overflow, so the oil is at the correct level when it starts to come out of the filler hole, so to do this operation we must lower the car again. Screw the cap back on, and run the engine at idle for a minute, then gently engage the gears with the handbrake pulled.
Posted on 12 September 2025 by ScegliAuto
Related tutorials
Renault Megane
(2008-2015 /
Megane III, Megane 3)
Replacing the transmission oil is very simple and does not require special tools; let's see how to perform the draining and subsequent topping up on …
Renault Megane
(2008-2015 /
Megane III, Megane 3)
In this video, learn how to replace the transmission oil on a Renault Megane. Position your car on a column lift and raise it to a comfortable height…
Renault Megane
(2008-2015 /
Megane III, Megane 3)
In this video, you will learn how to change the oil and filter on a Renault Megane III 1.6 DCi: start by removing the undertray to access the engine …
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |