Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Filter on the Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Instrument cluster

See other generations:
Video tutorial

In this video, you will learn how to change the oil and filter on a Renault Megane III 1.6 DCi: start by removing the undertray to access the engine oil drain plug; open the engine oil cap and dipstick at the top, and now you can remove the lower plug.

Allow the oil to drain into a container, which you will then dispose of properly at an authorised centre.

The oil to replace the used oil is SAE 5W30, and you will need 5.5 litres. Now, let's focus on the filter; remove the cap, let it drain into the same container as the used oil, and replace it. Refit the cap (it is advisable to replace it, and you will definitely change the seal) and now pour the new oil into the reservoir.

Run the engine for a bit to allow the new oil to reach the filter and refit the undertray. You are done.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) Today we will explain in a simple and quick way how to perform an oil change and oil filter replacement on a Renault Megane 3 vehicle. To perform the…
Renault Megane (2008-2015 / Megane III, Megane 3) A basic service consists of a simple engine oil change and oil filter replacement. No other replacements are required in this type of service, unlike…
Renault Megane (2015-2023 / Megane IV, Megane 4) Basic service consists of simply changing the engine oil and oil filter, without any other interventions. Here’s how to do it on a Renault Megane 4. …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos