Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headrest of the Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and eventually replace the front headrest of the Renault Captur. First of all, we get into the cockpit and start by pressing the buttons located at the base of the headrest; then we remove it upwards until it detaches completely, as shown in the video.

At this point, we carry out the repair or replacement of the front headrest, inserting the rods on the guides and finally adjusting the height of the headrest; in the same way, we will also remove the other headrests!


Posted on 27 September 2025 by ScegliAuto


Related tutorials

How to Replace the Front Shock Absorbers of the Renault Captur
How to Replace the Front Shock Absorbers of the Renault Captur
Renault Captur (2013-2019 / MK 1) Below are the instructions for removing and replacing the front suspension of the Renault Captur. First, open the vehicle's bonnet and start unscrewi…
How to Remove the Front Wing on Renault Captur
How to Remove the Front Wing on Renault Captur
Renault Captur (2013-2019 / MK 1) These short and simple steps will show you how to remove and replace the front wing on a Renault Captur. First, move to the side of the vehicle and s…
How to remove the rear bumper of a Renault Captur
How to remove the rear bumper of a Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting, open the tailgate of the boot of your Renault Captur. Begin by removing the rear lights by unscrewing the fixing screws and disconne…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos