Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump of the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Fuel pump

To replace the fuel pump of the Renault Kangoo, you will need to loosen the screws that secure the wheel arch of the left rear wheel: it will then be possible to remove it together with the corresponding wheel. By doing this, it will be possible to locate the pump at the top of the corresponding tank: by loosening the screws that secure it, it will be possible to completely detach it in order to also disconnect the power cables. At this point, it will be possible to attach the new one to the tank and connect it in order to verify that everything works correctly.

Posted on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump in a Renault Kangoo
Replacing the Fuel Pump in a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this guide, we will discover the instructions that will allow us to remove and replace the fuel pump in a Renault Kangoo. First, open the rear doo…
How to Replace the Fuel Pump on the Renault Kangoo
How to Replace the Fuel Pump on the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) To replace the fuel pump on the Renault Kangoo, open the rear compartment to locate the circular cover in the centre. Once this cover is removed by l…
How do you disassemble the fuel pump in the Renault Kangoo 1.5 dci?
How do you disassemble the fuel pump in the Renault Kangoo 1.5 dci?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The fuel pump that is presented in the video guide uploaded here is indeed from a Renault Kangoo and will be subject to a thorough maintenance, inclu…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - Where is the fuel pump located in the Renault Kangoo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos