Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open and remove the power cable of the Renault Zoe

Model: Renault Zoe MK 1 - Years 2013-2024

The Renault Zoe electric car can be opened via Bluetooth; it is necessary to download the app on your phone and open the vehicle. In case the system is disconnected, it is possible to open the car via the Internet by entering the personal four-digit code. After opening the vehicle, we get on board and disconnect the charging power, removing the remote control from the glove compartment and disconnecting the cable first from the vehicle and then from the charging station. After storing the cable in the trunk, we start the vehicle and drive on the road. In case of a failed charge, it may be necessary to perform a diagnosis using a computer at the workshop.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Renault Zoe?
How to Replace the Front Headlamp Bulb on the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) To replace the front headlamp bulb on the Renault Zoe, open the bonnet to access the components inside the engine bay: inside the corresponding headl…
Where is the OBD port located on the Renault Zoe?
Where is the OBD port located on the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) If you own a Renault Zoe and want to locate the OBD port, simply read the following guide carefully and follow all the steps described. Once inside t…
How do you replace the front headlight bulb of the Renault Zoe?
How do you replace the front headlight bulb of the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) In order to replace the headlight bulb of the Renault Zoe, you need to open the hood so that you can access the internal components of the compartmen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos