Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Pollen Filter on a Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

Let’s see how to remove the pollen filter fitted on a Renault Megane. Open the glove compartment and unscrew the securing screws (located at the sides of the drawer), rotate the glove compartment forward (pull it away from the dashboard).

Remove the cover plate acting as a stopper and slide the air filter out of the housing (as shown in the video). Once this is done, insert the new air filter into the filter holder (be careful to insert the filter correctly without bending it). Finally, refit the cover of the box and all components of the glove compartment as they were removed previously.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Filter on a Renault Megane
How to Remove the Cabin Filter on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How do you remove the cabin air filter on a Renault Megane? Let's see how to proceed with the removal. Use a plastic lever to detach the airbag lock …
How to Perform Basic Service on a Renault Megane 4?
How to Perform Basic Service on a Renault Megane 4?
Renault Megane (2015-2023 / Megane IV, Megane 4) Basic service consists of simply changing the engine oil and oil filter, without any other interventions. Here’s how to do it on a Renault Megane 4. …
How to Replace the Diesel Filter on the Renault Megane 3
How to Replace the Diesel Filter on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) Do you want to replace the diesel filter on this vehicle? The diesel filter is located behind the right front headlamp. To replace it, you need to re…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos