Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

See other generations:
Video tutorial

Do you want to replace the diesel filter on this vehicle? The diesel filter is located behind the right front headlamp. To replace it, you need to remove the right front wheel, take off the right wheel arch liner, and you will find it at the top right.

Disconnect the pipes and replace the filter (the pipes and bracket may vary depending on the type of diesel filter fitted). Once the filter is installed and the pipes are connected, it is necessary to fill it with diesel using the pump located behind the coolant reservoir; there is a bleed valve at the bottom of the filter that needs to be opened to ensure it fills properly with diesel.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

When to Change the Diesel Filter on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replacing the diesel filter on a Renault Megane? Here’s how to do it. Lift the car on a column lift, and remove the protection panel. Locate the dies…
How to Locate and Replace the Diesel Filter on the Renault Megane Mk4
How to Locate and Replace the Diesel Filter on the Renault Megane Mk4
Renault Megane (2015-2023 / Megane IV, Megane 4) This guide shows how to locate and replace the diesel filter on the Renault Megane Mk4. The filter is located at the front of the left rear wheel. To…
How to Remove the Diesel Filter on a Renault Megane
How to Remove the Diesel Filter on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove the diesel filter on a Renault Megane: open the front bonnet and lift it, then raise the car on a column lift or suitabl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos