Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to Change the Diesel Filter on a Renault Megane

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

See other generations:
This video is currently unavailable

Replacing the diesel filter on a Renault Megane? Here’s how to do it. Lift the car on a column lift, and remove the protection panel. Locate the diesel filter as shown in the video.

Using a socket spanner, unscrew the securing bolts near the container (disconnect the wires and various hoses from the filter) where the diesel filter is located. Remove the old diesel filter (replace it with a new filter).

Fit the filter to the attached container of the diesel filter (connect the hoses and wires). Refit the engine cover.

Lower the car.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Change the Diesel Filter on a Renault Megane III
How to Change the Diesel Filter on a Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you can see how to change the diesel filter on a Renault Megane III: first, remove the right front wheel arch liner, and right behind …
How to Replace the Diesel Filter on the Renault Megane 3
How to Replace the Diesel Filter on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) Do you want to replace the diesel filter on this vehicle? The diesel filter is located behind the right front headlamp. To replace it, you need to re…
How to Locate and Replace the Diesel Filter on the Renault Megane Mk4
How to Locate and Replace the Diesel Filter on the Renault Megane Mk4
Renault Megane (2015-2023 / Megane IV, Megane 4) This guide shows how to locate and replace the diesel filter on the Renault Megane Mk4. The filter is located at the front of the left rear wheel. To…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos